Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild - Page 62

***TitaniumTT*** · 04-14-2011, 05:36 PM

The selector grabbed two forks and missed the stopper so it over extended 2 hubs.... all the detent balls popped out, the springs are bent to shit, etc etc etc. It's an easy fix, but the tough part is trying to figure out how it happened. Once Dave figures that out, he can figure out how to make it NOT happen, then all will be well in the land of 6-spd goodness....

vex · 04-14-2011, 09:06 PM

What'd you use to wrap your harness? Raychem heat shrink? or something else?

***TitaniumTT*** · 04-14-2011, 10:55 PM

Raychem DR-25 and some 4:1 heatshrink from the DR-25 to the connectors

tweiss3 · 04-14-2011, 11:00 PM

Quote:

Originally Posted by TitaniumTT

The selector grabbed two forks and missed the stopper so it over extended 2 hubs.... all the detent balls popped out, the springs are bent to shit, etc etc etc. It's an easy fix, but the tough part is trying to figure out how it happened. Once Dave figures that out, he can figure out how to make it NOT happen, then all will be well in the land of 6-spd goodness....

WOW. I can't even fathom how you accomplished that one. Thats all I can say is wow.

***TitaniumTT*** · 04-14-2011, 11:09 PM

Quote:

Originally Posted by tweiss3

WOW. I can't even fathom how you accomplished that one. Thats all I can say is wow.

Yeah, I don't know either. I beat the every living shit outta the trans ALLLLLL day long and it just loved it. Then driving like a little girl on the way home from the auto-x is where it happened. Oh well, what can ya do?

***TitaniumTT*** · 04-14-2011, 11:10 PM

Sooooooo, I'm going to have a very interesting picture up on Saturday morning for all to see, then the fun will really begin. I'm giving myself 10:1 odds

RX SE7EN · 04-14-2011, 11:26 PM

um... brakes?

5 to 1, give yourself a little credit haha.

***TitaniumTT*** · 04-14-2011, 11:34 PM

Nope, not brakes... turbo's should be here tomorrow though (HUGE HUGE THANKS the Bryan @ BNR for busting ass and taking a special trip for me) although I am hopefull that I'll have brakes in my hand in a week.

Actually..... when are you planning on swinging by this weekend? You might be able to see the madness first hand, then you might actually raise me to 20:1

Saturday is going to be another 30 hr marathon and I think I'm going to say fuck the landi this weekend.

MaczPayne · 04-15-2011, 12:26 AM

The tension is building!

2gslse · 04-15-2011, 03:24 AM

Quote:

Originally Posted by TitaniumTT

Actually..... when are you planning on swinging by this weekend? You might be able to see the madness first hand, then you might actually raise me to 20:1

Saturday is going to be another 30 hr marathon and I think I'm going to say fuck the landi this weekend.

Thats right screw the Landi... anyone coming by needs to be either put to work on the FC or put to death for interupting progress, Brian ain't rolling over and givin' up that easy

***TitaniumTT*** · 04-15-2011, 06:29 AM

Quote:

Originally Posted by MaczPayne

The tension is building!

Wait till you see the pic I'm gonna post up

***TitaniumTT*** · 04-15-2011, 06:30 AM

Quote:

Originally Posted by 2gslse

Thats right screw the Landi... anyone coming by needs to be either put to work on the FC or put to death for interupting progress, Brian ain't rolling over and givin' up that easy

Wanna swing a little east after your dyno playdate today? Plenty of work

Good luck on the dyno today MC!

vex · 04-15-2011, 09:44 AM

Quote:

Originally Posted by TitaniumTT

Raychem DR-25 and some 4:1 heatshrink from the DR-25 to the connectors

Too expensive and not sold in the amount I need. (I am not going to pay $425 for 50 feet)

tweiss3 · 04-15-2011, 09:51 AM

I was thinking about it today, the title of this subforum bothers me. Is there ever such a thing as a rotary car build? I'm not sure I belive that. For rotaries, its always only rebuild, or extensive maitnence with new and upgraded parts.

I shall submit this thread as Exhibit 1.

FC3S Murray · 04-15-2011, 05:05 PM

........pics...................are................ ..good.............

04-14-2011, 05:36 PM	#916
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	The selector grabbed two forks and missed the stopper so it over extended 2 hubs.... all the detent balls popped out, the springs are bent to shit, etc etc etc. It's an easy fix, but the tough part is trying to figure out how it happened. Once Dave figures that out, he can figure out how to make it NOT happen, then all will be well in the land of 6-spd goodness.... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-14-2011, 09:06 PM	#917
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	What'd you use to wrap your harness? Raychem heat shrink? or something else? __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

04-14-2011, 10:55 PM	#918
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Raychem DR-25 and some 4:1 heatshrink from the DR-25 to the connectors __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-14-2011, 11:10 PM	#921
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Sooooooo, I'm going to have a very interesting picture up on Saturday morning for all to see, then the fun will really begin. I'm giving myself 10:1 odds __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-14-2011, 11:34 PM	#923
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Nope, not brakes... turbo's should be here tomorrow though (HUGE HUGE THANKS the Bryan @ BNR for busting ass and taking a special trip for me) although I am hopefull that I'll have brakes in my hand in a week. Actually..... when are you planning on swinging by this weekend? You might be able to see the madness first hand, then you might actually raise me to 20:1 Saturday is going to be another 30 hr marathon and I think I'm going to say fuck the landi this weekend. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-14-2011, 11:26 PM	#922
RX SE7EN Rotary Fanatic Join Date: Feb 2010 Posts: 183 Rep Power: 16	um... brakes? 5 to 1, give yourself a little credit haha.

04-15-2011, 12:26 AM	#924
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal Posts: 442 Rep Power: 18	The tension is building! __________________ Johnson TA FC in the works!

04-15-2011, 09:51 AM	#929
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio Posts: 319 Rep Power: 15	I was thinking about it today, the title of this subforum bothers me. Is there ever such a thing as a rotary car build? I'm not sure I belive that. For rotaries, its always only rebuild, or extensive maitnence with new and upgraded parts. I shall submit this thread as Exhibit 1. __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

04-15-2011, 05:05 PM	#930
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	........pics...................are................ ..good............. __________________ Same pig, new soul