FC Lower arm bar

***TitaniumTT*** · 10-08-2012, 02:21 PM

Specifically of the engine bay

Turbo II Rotor · 10-08-2012, 04:50 PM

Quote:

Originally Posted by Raksj04

Could you post more pics?

Sure thing Rich. I still need to pull it back off and paint it, bare metal rusts with the quickness here in the north east. I made it with the cross tube short enough to fit a socket up on the inside bolt. I used 3/16 plate and traced out the control arm bucket over top, cut it out and welded it to the inside. I then bolted the mounts to the car, measured and cut my 1 1/2" square tube to 24 1/4", hammered it in and welded it in place. I also drilled and tapped the buckets for a zerk fitting so I can grease my delrin bushings on the car.

Flux core FTL. I need to set up an argon tank for my welder.

Quote:

Originally Posted by TitaniumTT

Specifically of the engine bay

***TitaniumTT*** · 10-09-2012, 07:54 AM

Quote:

Originally Posted by Turbo II Rotor

I also drilled and tapped the buckets for a zerk fitting so I can grease my delrin bushings on the car.

That's a cool idea right there

Quote:

Originally Posted by Turbo II Rotor

Flux core FTL. I need to set up an argon tank for my welder.

Yes... most definately...

is the car driveable? Planning on bringing it up to that auto-x deal if you attend? If you don't I could meet you that night in SW CT

10-08-2012, 02:21 PM	#1
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Specifically of the engine bay __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**