|
|||||||
| Piston Engine Conversion Have you replaced your rotary with a V8 or any other type of piston engine? Tell us about it! |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| Piston Engine Conversion Have you replaced your rotary with a V8 or any other type of piston engine? Tell us about it! |
|
|
|
Thread Tools | Display Modes |
|
|
02-16-2013, 01:44 AM
|
#1 |
|
nerd
Join Date: May 2011
Location: Lakeland Florida
Posts: 107
Rep Power: 15  |
ok, got the measurements needed, ended up having to shim the trans 3/8 up at the tailshaft, that is all the body and engine configuration will allow, but its better than nothing, going to make new lower control arms tomorrow, and stick it back together and let it eat and see what shakes loose.
also have to deal with the gearing..1 thing at a time... |
|
|
|
02-17-2013, 02:56 PM
|
#2 |
|
nerd
Join Date: May 2011
Location: Lakeland Florida
Posts: 107
Rep Power: 15 |
 new lower arms, now with 1.25x.125 tubes, hope it puts things where they need to be, wont know for certain till its all back together |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
