Rx-2 suspension modifications?

chibikougan · 05-10-2013, 02:29 AM

I think I am going this route for coilovers. I was thinking of putting spherical bearings in the 4 link. Thing I am at a loss for is rear diff and brakes. Although I have a set of rebuilt TII calipers I could use.

http://compare.ebay.com/like/3008457...Types&var=sbar

mattallac · 05-10-2013, 04:49 PM

My front suspension on my 2 is on and it sits to high (2 1/2 in to high), I have front 82 rx7 struts , coil overs and re speed ( garbage ) camber plates witch I am going to have to re design and 275 lb springs ( because I have a 13b turbo car ) . does anyone know of a shorter front strut ? I am using re speed tubular control arms with miata ball joints and I am pretty pleased with those .

05-10-2013, 04:49 PM	#2
mattallac Rotary Fanatic Join Date: Aug 2011 Location: crockett ca. Posts: 176 Rep Power: 0	My front suspension on my 2 is on and it sits to high (2 1/2 in to high), I have front 82 rx7 struts , coil overs and re speed ( garbage ) camber plates witch I am going to have to re design and 275 lb springs ( because I have a 13b turbo car ) . does anyone know of a shorter front strut ? I am using re speed tubular control arms with miata ball joints and I am pretty pleased with those .