Stredrotor's RX4 Coupe * Project 20B *

Stredrotor · 10-23-2013, 03:59 AM

Had a little bit more progress.

I got back the laser cut parts for the sump and tack them together for a trial fit up.

Good clearance on the crossmember.

But after checking clearance on the oil pickup I knew I had a problem.

This is a 13B turbo pickup.

Started to design a lower profile pickup.

The sump will have to be modified.

And even then I will have to lower the swaybar. Might have a look at some of those anti-dive spacers.

10-23-2013, 03:59 AM	#33
Stredrotor Rotary Fan in Training Join Date: Nov 2009 Location: Tasmania, Australia Posts: 53 Rep Power: 16	Had a little bit more progress. I got back the laser cut parts for the sump and tack them together for a trial fit up. Good clearance on the crossmember. But after checking clearance on the oil pickup I knew I had a problem. This is a 13B turbo pickup. Started to design a lower profile pickup. The sump will have to be modified. And even then I will have to lower the swaybar. Might have a look at some of those anti-dive spacers. __________________ RX4 coupe 20B conversion http://www.rotarycarclub.com/rotary_...ead.php?t=9884