Rice Racing M&W CDI COP Set-up

[Pantera EFI]

Hi Peter, your brackets look great!

I am of GREAT concern with your "pictured" coil boot design.

The coil boot MUST by long enough to contact the steel of the fitted spark plug.
YOUR design allows for an Air Gap that will conduct the spark AWAY from the inside of the plug!

The use of MY IGN-x (a coil family), your pictured IGN-1A AND the IGN-1CD, MUST be kept to HIGH STANDARD.

Thus please correct your boot design.

Lance

[chibikougan]

Originally Posted by Pantera EFI

Hi Peter, your brackets look great!

I am of GREAT concern with your "pictured" coil boot design.

The coil boot MUST by long enough to contact the steel of the fitted spark plug.
YOUR design allows for an Air Gap that will conduct the spark AWAY from the inside of the plug!

The use of MY IGN-x (a coil family), your pictured IGN-1A AND the IGN-1CD, MUST be kept to HIGH STANDARD.

Thus please correct your boot design.

Lance

Are you saying that not covering the whole ceramic of the plug and the boot directly contacting the metal it will cause spark away from the inside of the plug?