Paint stripper doesnt work...

classicauto · 06-30-2008, 01:08 PM

Also, a good tip when trying to strip a panel:

Take some rough paper (40grit) or an old piece of grinding disc (~26 grit) and scuff the whole surface up qiuckly. You don't want to sand it all, just cut through to the metal is a few areas to allow the stripper to more easily "bite" under the paint. It will also make it easier to scrape off afterwars since you can start from a scratch where the stripper has cleaned it to metal....

06-30-2008, 01:08 PM	#1
classicauto crash auto?fix auto Join Date: Feb 2008 Posts: 816 Rep Power: 18	Also, a good tip when trying to strip a panel: Take some rough paper (40grit) or an old piece of grinding disc (~26 grit) and scuff the whole surface up qiuckly. You don't want to sand it all, just cut through to the metal is a few areas to allow the stripper to more easily "bite" under the paint. It will also make it easier to scrape off afterwars since you can start from a scratch where the stripper has cleaned it to metal....