FC3S Power Window system rebuild

[knonfs]

Update - I finally followed Ted's DIY process/instructions. Thanks Ted!!!

I used a home depot orange bucket, put the track in there, and soaked it in engine degreaser, and then power washed it with a harbor freight (or equivalent electric power washer).

Windows go up/down smoother, and the process is quicker, but not as quick as I was hoping. Tested both mechanism/motors after everything was said and done, by pulling current straight from the battery and the damn system works like a brand new car!!

Relay mods is in order, not needed, but man! (and yes, the contacts on both power windows switches are clean)

With that said, the process was not uneventful. I had a brain fart, and attempted to install the glass on the passenger side from the INTERIOR side of the door. Not sure how, but as the glass was going in, it got stucked, and after pulling up... I managed to shatter the glass