20B Eshaft Pullers -Pics-

Prometheus · 09-03-2008, 07:35 PM

Jesus, I wish I had one of those a last weekend.

I had to use a pry bar (that I wrapped with a rag many times, to be sure not to gnar the lobe) and a piece of Teflon between the side plate (to crush/ cushion) tha back side of the pry bar.

with some penetrating oil and no tapping with a hammer, the lobe simply slid off with adequate pressure applied to the pry bar.

I was surprised on how easy the lobe came off.

I did this on 3 20B blocks and there was no damage.

09-03-2008, 07:35 PM	#1
Prometheus Rotary Fan in Training Join Date: Feb 2008 Location: Portland, Oregon/ Vancouver, Washington Area Posts: 49 Rep Power: 0	Jesus, I wish I had one of those a last weekend. I had to use a pry bar (that I wrapped with a rag many times, to be sure not to gnar the lobe) and a piece of Teflon between the side plate (to crush/ cushion) tha back side of the pry bar. with some penetrating oil and no tapping with a hammer, the lobe simply slid off with adequate pressure applied to the pry bar. I was surprised on how easy the lobe came off. I did this on 3 20B blocks and there was no damage.