![]() |
#16 |
Guest
Posts: n/a
|
I have a little over 2qts in my diff that is from filling it on a chair before putting it in the car..
I plan to check the compacity later next spring before I start the car up.. |
![]() |
![]() |
#17 |
Rotary Fanatic
Join Date: Feb 2008
Location: hoover
Posts: 161
Rep Power: 18 ![]() |
i used redline a few months ago. couldnt really tell you if theres a difference or not yet. i havent changed it and prolly wont need to for a good while.
|
![]() |
![]() |
![]() |
#18 |
Rotary Fanatic
Join Date: Mar 2008
Posts: 104
Rep Power: 18 ![]() |
I started with AMSOIL in my FD's trans and rear then switched to NEO. Can't say any difference for differential performance but the NEO resulted in smoother shifting.
Jack |
![]() |
![]() |
![]() |
#19 |
Rotary Fanatic
Join Date: Oct 2008
Posts: 274
Rep Power: 17 ![]() |
I too have used both redline and neo in my fc and fd and neo seems to work better for me.
|
![]() |
![]() |
![]() |
#20 |
RCC Addict
Join Date: Mar 2008
Location: Honolulu, Hawaii USA
Posts: 1,813
Rep Power: 19 ![]() |
This thread is at least 3 months old.
Why are people talking about shifting when the OP was just talking about the rear diff??? -Ted |
![]() |
![]() |
![]() |
#21 |
Rotary Fanatic
Join Date: Oct 2008
Posts: 274
Rep Power: 17 ![]() |
Not being confrontational but, 1- share and exchange information, experiences and information with fellow rotary lovers. 2- keep site active, current and alive. 3- meet fellow car enthusiasts with similar likes and taste in automobiles, ie; network. You sir are right, my first post on this subject was about transmission shifting (totally irrelevant). My bad! My second post is about differentials. I hope that is ok with you, peace.
|
![]() |
![]() |
![]() |
#22 |
The Newbie
Join Date: Jul 2009
Posts: 7
Rep Power: 0 ![]() |
I have heard that redline is good but I haven't tried it yet. Anyway, why don't you try using costal 80w-90. Its very good.
__________________
mazda parts |
![]() |
![]() |
![]() |
#23 |
Pirate
Join Date: Mar 2008
Location: Central IL
Posts: 1,323
Rep Power: 19 ![]() |
actually, the recomended fluid is 75W-90 NOT 80W-90... there is a factory service bulletin that says to switch to the 75W grade if the customer complains of hard shifting in cold weather. also, there is a Redline Gear oil for hypoid gears, ie: differentials, and a Redline MTF, different grades of both. There is a specific Redline MTF that is geared for Mazda Transmissions. another thign to consider is the use of GL4 gear oil. From some reading I did, it seems like the GL4 stuff seems to work smoother than the GL5 stuff because the GL5 fluid is too slippery to properly engage the synchronizer blocking rings...(the brass/copper looking things that are part of the synchronizer assembly in your transmission)
Here's a pic: ![]() MT-90 75W90 GL-4 Gear Oil is what you want to use for the trans, not recomended for hypoid gears. 75W90 GL-5 Gear Oil is what you want to use for the diff. Personally, I could not afford Redline right now, so I used GL4 compatible Coastal Gear oil, 75W-90 grade, this stuff is good for a daily, and cheap if you want to flush out your drivetrain before putting in expensive stuff. http://www.redlineoil.com/Products.aspx?pcid=7 There, bam... I feel like a fuckin expert on redline oils now, they should pay me for this! ![]()
__________________
Rotaries:They are NOT that complicated! |
![]() |
![]() |
![]() |
#24 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
hmm that is interesting.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#25 |
Pirate
Join Date: Mar 2008
Location: Central IL
Posts: 1,323
Rep Power: 19 ![]() |
I dunno, all of it was fairly easy to find, Google search, evil forum search, and some light reading, calling people, etc...
I would just recommend going with a good synthetic, like Redline, Neo, or Amsoil... in a street car, I think any will be better than the average stuff on the shelf. Oh, and All Data: http://www.alldata.tsb.com/home/ rocks when you dont have to pay for it! ![]()
__________________
Rotaries:They are NOT that complicated! |
![]() |
![]() |
![]() |
#26 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
once the FB stops leaking fluid everywhere, ill actually treat it to some nicer fluid in the differential. Especially considering the 4.78 gears and the tighter preload im using. Im still running synthetic but i have a rather nasty leak...
...as for my transmission, reverse is fooked, so i have to replace it soon enough anyway.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#27 |
Pirate
Join Date: Mar 2008
Location: Central IL
Posts: 1,323
Rep Power: 19 ![]() |
The rumor is that if you overfill your trans, the seals will leak like a mofo, so make sure not to put too much in.
http://www.aaroncake.net/rx-7/transfluid.htm
__________________
Rotaries:They are NOT that complicated! |
![]() |
![]() |
![]() |
#28 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
i havent overfilled anything. i actually havent really touched the transmission either. but the diff has a leak at the mating area of the 3rd member and the axle housing
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#29 |
Rotary since 1972
Join Date: Nov 2008
Location: Tucson
Posts: 231
Rep Power: 17 ![]() |
I have used SWEPCO in transmissions and rears since 1986 in all client and race cars. Never had a gear oil related failure in anything. Never had any oil on the ground issues like most synthetics.
I believe I posted else where on the site my experiences and other relavent information out this amazing product. For a street vehicle you will probably never have to change your oil again since SWEPCO's recommended service time for change is 10,000 hrs. They offer an oil analysis for their product recommended test time is every 3 years. To check out more go to www.swepcousa.com. Last edited by rx4ur7; 01-29-2010 at 01:02 PM. |
![]() |
![]() |
![]() |
#30 |
Rotary Fan in Training
Join Date: Mar 2008
Posts: 89
Rep Power: 18 ![]() |
I am sure I am late too this but I really like Neo Synthetic oil. I have used it my RX7 and IS300. I know NEO is heavily involved with the motorsports world, and Carbonetic now uses there oil for there LSDs.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|