FS: NIB WORK MEISTER 3piece wheels

fikren · 12-18-2008, 11:05 PM

SOLD!

As much as I hate to do this some personal things have left me no choice. Up for sale are a NIB, never mounted, only two have even been out of the box and that was for pictures.

Specs are

Work Meister 3 piece Black Centers Polished lips
18x10 fronts +29
18x11 rears +30

Plans were to run around a 285 on the front and a 315 on the rear was going to use the burnout kit on the car. Were purchased through autornd and was figured these should fit pretty well with that particular kit with minimal or no alterations needed for them to fit, not 100% on that as I never got the car and the wheels into the body shop.

Price is $2000 + shipping (no idea on shipping, it would be 4 boxes total). I paid over $2800 for them and that was when the dollar was in alot better shape than it is now. Get a great set of wheels without the 3+ month wait for them to be shipped from Japan. Local pickup is also available. Several people can vouch for me as far as trustworthiness etc as I've sold somewhere around 5-6k when I was parting my car with no issues. Please PM with any questions. Pictures below. Thanks, Jonathan

AHarada · 12-18-2008, 11:58 PM

Bump for some AWESOME wheels. If I had that much money laying around I would buy them up so quick.

85rx-7gsl-se · 12-19-2008, 12:02 AM

Posted up for you on Tennspeed.net

KaiFD3S · 12-24-2008, 04:50 AM

why could it not have been 12's damm it...

Miata_mx5 · 12-24-2008, 09:56 AM

Bump for awesome wheels.

***Herblenny*** · 12-24-2008, 11:09 AM

WOW!! nice wheels!!

Pourman · 12-24-2008, 11:53 PM

NICE !! ... was looking at Gram Light 57S Pro Titanium , but these are 2nd on my list ... wonder if these would fit with Border front fenders at that width / offset ??

money · 12-25-2008, 05:16 PM

damn.. if the rear wheel i about 1" longer.. i would get this so quick

Charlie Redden · 12-26-2008, 06:01 PM

Pimp wheels! Good luck with your sale!

Charlie

fikren · 12-31-2008, 12:33 AM

Quote:

Originally Posted by Pourman

NICE !! ... was looking at Gram Light 57S Pro Titanium , but these are 2nd on my list ... wonder if these would fit with Border front fenders at that width / offset ??

Not real sure. They were going to be used with the burnout kit so rishie at autoRnD crunched his numbers and this was as close as he could figure without actually test fitting wheels and various tires. They were sized for the tire size I wanted to run and for the wheel and edge of the fenders to line up so that they did not sit inside the fenders if looking down or stick out some rediculous ammount. Some of it will depend on suspension setup and tire size, stretch or not, etc. To much stuff for me to figure out plus if they weren't spot on perfect I wasn't concerned as the plans were to get rubber on the wheels and send them with the car to the body shop so that it all fit so its possible a little bit of work would have had to be done for it to be spot perfect. If you can find out the size differences on the Border and the Burnout and do alittle bit of diggin you may be able to find out for sure.

Thanks for the replies guys. These are definatly sexy wheels and if it were not for some circumstances I have going on right now these would not be up for sale. Even when I was posting my project car for sale I was still planning on keeping the wheels and worse case do some rx-8 modifications to make them fit on it. As far as being an inch wider, if I had known I was going to be selling them without ever using them, I would have ordered them an inch wider just for you guys.

Unfortunatly they were ordered based on the plans I had and sizes I wanted to run so thats why on 11's.

On another note, if anyone is local and either interested in them or willing to help a friend out, arrangements can be made to fit them on a similar car if that helps anyone out. No rubber but should be able to jack the car throw one on then jack the suspension alittle to get to ride height. Wouldn't be spot perfect but should give a pretty damn close idea where any problems or work would be needed to fit your application.

Let me know if anyone needs any more info or pictures of them. Those pictures above were taken the day they showed up and they have been boxed ever since but I got no problems taking some more if needed.

Thanks,
Jonathan

85rx-7gsl-se · 01-30-2009, 07:52 AM

Still have these? Are you still firm on the price? I know a guy in Nashville who is interested, but he can't swing quite that much.

fikren · 01-30-2009, 08:07 AM

Quote:

Originally Posted by 85rx-7gsl-se

Still have these? Are you still firm on the price? I know a guy in Nashville who is interested, but he can't swing quite that much.

yeah price is going to be firm, I've about decided I may not be selling them or my 7. Think I am going to tackle the body work and such on the 7 nyself, more I look at it there is a ton of stuff I could be doing that won't cost me anything, let the funds build alittle and then focus on the stuff I don't have. Think thats why I never did take any pictures of the 7, my subconcious way of saying "your not selling it".

85rx-7gsl-se · 01-30-2009, 09:57 AM

Thats cool man. Just had a friend in Nashville with a TII that was interested, but said the most he could come up with was $2300. Figured that was too low but had to ask

So are these off the market for now?

fikren · 08-19-2009, 02:05 AM

bump for price drop

speedjunkie · 08-19-2009, 03:30 PM

So how much is the new price? LOL DAMN I wish I had the money laying around. I can't see the pics right now but from the sizes they sound juicy, and I'm almost running this exact size setup anyway. Yummy.

12-18-2008, 11:05 PM	#1
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN Posts: 318 Rep Power: 18	FS: NIB WORK MEISTER 3piece wheels - SOLD SOLD! As much as I hate to do this some personal things have left me no choice. Up for sale are a NIB, never mounted, only two have even been out of the box and that was for pictures. Specs are Work Meister 3 piece Black Centers Polished lips 18x10 fronts +29 18x11 rears +30 Plans were to run around a 285 on the front and a 315 on the rear was going to use the burnout kit on the car. Were purchased through autornd and was figured these should fit pretty well with that particular kit with minimal or no alterations needed for them to fit, not 100% on that as I never got the car and the wheels into the body shop. Price is $2000 + shipping (no idea on shipping, it would be 4 boxes total). I paid over $2800 for them and that was when the dollar was in alot better shape than it is now. Get a great set of wheels without the 3+ month wait for them to be shipped from Japan. Local pickup is also available. Several people can vouch for me as far as trustworthiness etc as I've sold somewhere around 5-6k when I was parting my car with no issues. Please PM with any questions. Pictures below. Thanks, Jonathan __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets Last edited by fikren; 02-25-2010 at 09:44 PM. Reason: price drop

12-24-2008, 09:56 AM	#5
Miata_mx5 Rotary Fan in Training Join Date: Mar 2008 Location: Irvine, Southern California Posts: 99 Rep Power: 18	Bump for awesome wheels. __________________ Endless USA My Livejournal Blog

12-24-2008, 11:09 AM	#6
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	WOW!! nice wheels!! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

08-19-2009, 02:05 AM	#14
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN Posts: 318 Rep Power: 18	bump for price drop __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets

08-19-2009, 03:30 PM	#15
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	So how much is the new price? LOL DAMN I wish I had the money laying around. I can't see the pics right now but from the sizes they sound juicy, and I'm almost running this exact size setup anyway. Yummy. Last edited by speedjunkie; 08-19-2009 at 03:32 PM.

12-18-2008, 11:58 PM	#2
AHarada Rotary Fanatic Join Date: Mar 2008 Posts: 162 Rep Power: 18	Bump for some AWESOME wheels. If I had that much money laying around I would buy them up so quick.

12-24-2008, 04:50 AM	#4
KaiFD3S Rotary Fanatic Join Date: Mar 2008 Posts: 437 Rep Power: 18	why could it not have been 12's damm it...

12-24-2008, 11:53 PM	#7
Pourman Rotary Fanatic Join Date: Mar 2008 Location: Perdido Key , Florida Posts: 320 Rep Power: 18	NICE !! ... was looking at Gram Light 57S Pro Titanium , but these are 2nd on my list ... wonder if these would fit with Border front fenders at that width / offset ??

12-25-2008, 05:16 PM	#8
money Rotary Fan in Training Join Date: Jul 2008 Posts: 39 Rep Power: 0	damn.. if the rear wheel i about 1" longer.. i would get this so quick

12-26-2008, 06:01 PM	#9
Charlie Redden 17+ years... Join Date: Feb 2008 Location: Oahu Posts: 59 Rep Power: 18	Pimp wheels! Good luck with your sale! Charlie