Rice Racing M&W CDI COP Set-up

Pantera EFI · 03-17-2015, 08:50 PM

Hi Peter, your brackets look great!

I am of GREAT concern with your "pictured" coil boot design.

The coil boot MUST by long enough to contact the steel of the fitted spark plug.
YOUR design allows for an Air Gap that will conduct the spark AWAY from the inside of the plug!

The use of MY IGN-x (a coil family), your pictured IGN-1A AND the IGN-1CD, MUST be kept to HIGH STANDARD.

Thus please correct your boot design.

Lance

03-17-2015, 08:50 PM	#11
Pantera EFI The Newbie Join Date: Mar 2015 Posts: 11 Rep Power: 0	Ign-1, Ign-1a, Ign-1cd Hi Peter, your brackets look great! I am of GREAT concern with your "pictured" coil boot design. The coil boot MUST by long enough to contact the steel of the fitted spark plug. YOUR design allows for an Air Gap that will conduct the spark AWAY from the inside of the plug! The use of MY IGN-x (a coil family), your pictured IGN-1A AND the IGN-1CD, MUST be kept to HIGH STANDARD. Thus please correct your boot design. Lance

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode