RXtacy's slooow build up - Rotary Car Club

		Rotary Car Club > Tech Discussion > Show your rotary car build up.
RXtacy's slooow build up

Mark Forums Read

Show your rotary car build up. Show off your Rotary Car build!

PaperClip

RXtacy RXtacy's slooow build up 03-16-2013, 03:38 PM

PaperClip

RXtacy Dash pulled and ready to... 03-16-2013, 03:44 PM

PaperClip

RXtacy Once the interior was up to... 03-16-2013, 03:53 PM

RXtacy All sanded and primed. Also... 03-16-2013, 03:56 PM

RXtacy The results! How she looked... 03-16-2013, 04:05 PM

chibikougan Nice whats so slow about this... 03-16-2013, 04:14 PM

RXtacy That's all historic stuff... 03-16-2013, 04:34 PM

RXtacy Once I got her back home I... 03-16-2013, 04:13 PM

RXtacy Not much changed between 2011... 03-16-2013, 04:33 PM

RXtacy Up until this point... 03-16-2013, 05:51 PM

Fendamonky You know I had COMPLETELY... 03-20-2013, 12:37 PM

RXtacy I need to do a LOT of things... 03-20-2013, 01:54 PM

JL1RX7 Let me know if you need a... 03-20-2013, 02:35 PM

RXtacy UPDATE! :lol: After tear... 10-10-2013, 01:48 PM

RXtacy How do I plan to get more air... 10-10-2013, 02:06 PM

RXtacy Got my turbo from Turblown.... 10-10-2013, 02:23 PM

RXtacy Next it was on to the fuel... 10-10-2013, 02:34 PM

RXtacy Once the fuel system was... 10-10-2013, 02:47 PM

RXtacy That's pretty much up to date... 10-10-2013, 02:53 PM

RedR1 that's looking quite baller,... 10-10-2013, 03:06 PM

RXtacy Thanks buddy! I haven't made... 10-10-2013, 03:12 PM

RedR1 do you think chassis flex... 10-10-2013, 03:23 PM

RXtacy Would what rub? If you're... 10-10-2013, 03:52 PM

More replies below current depth...

speedjunkie I'm diggin how short those... 10-11-2013, 09:04 PM

RXtacy Yea I put an empty keg in my... 10-11-2013, 09:26 PM

speedjunkie Sweet! Yeah I remember... 10-12-2013, 07:11 PM

RXtacy Small update. Did some more... 10-11-2013, 09:32 PM

chibikougan Oooooh! 10-11-2013, 11:03 PM

RXtacy Thank you sir for the tips!... 10-12-2013, 02:52 AM

Fendamonky Looking badass Mike!! I can´t... 10-14-2013, 09:08 AM

RXtacy Haha no worries. Is it Eric?... 10-14-2013, 07:07 PM

RXtacy Small update: Made the cut... 10-14-2013, 08:38 PM

chibikougan Teee Heee! That setup seems... 10-14-2013, 10:23 PM

JhnRX7 Awesome project! Looking... 10-21-2013, 01:24 PM

RXtacy Thanks John :icon_tup: ... 10-21-2013, 02:49 PM

Turblown Interesting! Looking forward... 10-21-2013, 06:33 PM

RXtacy Thanks! Me too :sifone: ... 10-21-2013, 07:19 PM

More replies below current depth...

speedjunkie I'm planning on plumbing mine... 10-22-2013, 12:48 PM

TitaniumTT Looks good Mike! I <3 Pics ... 10-23-2013, 05:31 PM

JhnRX7 :smilielol5: Yeahhhhh this... 10-23-2013, 06:04 PM

RXtacy Thanks buddy. I left out what... 10-24-2013, 08:03 AM

TitaniumTT DO IT! I need a trailer in a... 10-23-2013, 06:49 PM

RXtacy Few pics of the finished... 10-24-2013, 05:27 PM

Fendamonky That looks pretty damn good... 10-25-2013, 10:59 AM

RXtacy Gotcha, yea my plan is to do... 10-25-2013, 11:38 AM

speedjunkie Yeah I always wondered too... 10-25-2013, 06:51 PM

More replies below current depth...

JhnRX7 :o16: Sexy! 10-25-2013, 05:43 AM

RENESISFD Nice work on the short runner... 10-25-2013, 10:24 AM

RXtacy Has anyone else encountered... 10-26-2013, 02:57 PM

RXtacy Small update. Got started... 10-26-2013, 03:04 PM

speedjunkie Yeah I didn't think it was... 10-27-2013, 10:43 PM

Fendamonky Your setup keeps getting... 10-26-2013, 05:29 PM

RENESISFD It looks like you are... 10-28-2013, 08:21 AM

RXtacy Has the wait time on the EFR... 10-28-2013, 09:31 AM

speedjunkie Yeah I've heard it's gotten... 10-28-2013, 05:47 PM

Pete_89T2 That hardline setup is sweet,... 10-28-2013, 06:51 PM

RXtacy Maybe the price increase has... 10-28-2013, 07:37 PM

RENESISFD That seems like the only one... 10-28-2013, 09:55 AM

RXtacy That's not a bad idea. I have... 10-28-2013, 10:06 AM

RENESISFD I have aluminum banjo... 10-29-2013, 02:25 PM

speedjunkie Maybe lol, I have no idea. ... 10-29-2013, 05:22 PM

RENESISFD ^, yes, I use stainless... 10-29-2013, 06:35 PM

RXtacy The proper set up for thermal... 10-29-2013, 08:51 PM

speedjunkie Hmmmm, that does sound like a... 10-31-2013, 10:38 PM

RENESISFD ^ This is the best I could... 10-30-2013, 08:02 AM

RXtacy Hopefully... :rofl: ... 10-31-2013, 07:31 AM

RXtacy Where did you find the... 11-01-2013, 09:38 PM

RENESISFD T-fittings from... 11-02-2013, 06:23 AM

kraftjason413 If I may step back a bit,... 11-26-2013, 11:45 AM

Fendamonky The reason(s) people tend to... 11-26-2013, 05:08 PM

Turblown Any updates ? 12-10-2013, 04:30 PM

RXtacy Just got back from ~month in... 12-10-2013, 05:25 PM

RXtacy Not much of an update, but I... 08-06-2015, 08:33 AM

silverfdturbo6port Nice build and nice welds. ... 08-06-2015, 12:11 PM

RXtacy Thanks :icon_tup: You... 08-06-2015, 02:33 PM

RXtacy Here is how the engine sits... 08-06-2015, 09:28 PM

RXtacy Also dual passed my radiator.... 08-06-2015, 09:37 PM

GySgtFrank You actually have been... 08-06-2015, 09:39 PM

RXtacy Never claimed I was gonna... 08-06-2015, 09:44 PM

speedjunkie You may want to add a few... 08-08-2015, 02:47 AM

RXtacy I want to have a clever come... 08-09-2015, 06:46 PM

RXtacy Made some really good... 08-09-2015, 07:30 PM

GySgtFrank You know where you can stick... 08-09-2015, 08:50 PM

RXtacy Thought you might like that,... 08-09-2015, 09:31 PM

GySgtFrank I figured that's who the... 08-09-2015, 09:36 PM

RXtacy Made some more progress. Got... 08-15-2015, 07:34 PM

GySgtFrank Woohoo! progress. I've been... 08-15-2015, 09:00 PM

RXtacy In a standard vertical... 08-15-2015, 09:23 PM

GySgtFrank That's why they're called... 08-15-2015, 09:29 PM

RXtacy You know KS was a Union state... 08-15-2015, 09:33 PM

TitaniumTT :fawk: There was a list,... 08-17-2015, 09:49 PM

More replies below current depth...

speedjunkie I'm reinstalling AC too after... 08-16-2015, 03:04 AM

RXtacy Yea I hear ya. Getting swamp... 08-17-2015, 09:52 AM

More replies below current depth...

Fendamonky That looks fucking GREAT... 08-19-2015, 11:59 AM

RXtacy Thanks buddy! The bay... 08-20-2015, 12:21 AM

speedjunkie No shit? I'll have to try... 08-20-2015, 01:27 AM

TitaniumTT There are two things certain... 08-30-2015, 12:32 PM

RXtacy Should we do the percentage... 08-30-2015, 05:48 PM

JL1RX7 Shit just got real! That... 08-30-2015, 05:58 PM

RXtacy Been out of town for work and... 08-29-2015, 02:38 PM

GySgtFrank oooh! shiny bits. :) 08-29-2015, 03:04 PM

speedjunkie Oh my. I've thought about... 08-29-2015, 11:32 PM

RXtacy Shiny for now ;) I... 08-29-2015, 11:56 PM

chibikougan Woohooo! 08-30-2015, 12:45 AM

TitaniumTT Right before we ANALyze the... 08-30-2015, 08:42 PM

Nutsid I'm digging how the car is... 09-03-2015, 05:08 AM

RXtacy Touché :lol: Thanks... 09-08-2015, 11:25 AM

xcon Nice work and looking good :) 10-20-2015, 04:24 PM

RXtacy Good to see a new face :) ... 10-21-2015, 09:14 AM

speedjunkie I like those end tanks so... 10-22-2015, 01:02 AM

RXtacy Cut a large pipe in half.... 10-22-2015, 08:08 AM

speedjunkie Shit, whatever man, that... 10-24-2015, 12:43 AM

RXtacy Got the intercooler mostly... 10-23-2015, 08:15 AM

GySgtFrank That is quite pretty. Appears... 10-23-2015, 08:37 AM

RXtacy Thanks Kevin. I spent a lot... 10-23-2015, 08:45 AM

TitaniumTT I'll post pics of the VMIC I... 10-24-2015, 12:54 PM

speedjunkie Rotary fever? 10-25-2015, 02:11 AM

TitaniumTT lol... the 102* I spiked... 10-25-2015, 10:26 AM

RXtacy Thanks buddy! :lol: I... 10-26-2015, 08:38 AM

speedjunkie Well I think it still turned... 10-27-2015, 12:58 AM

RXtacy Don't get me wrong I'm happy... 10-27-2015, 09:33 AM

More replies below current depth...

RXtacy Here is the hot side pipe... 10-26-2015, 06:36 PM

JL1RX7 Might this make an appearance... 10-26-2015, 07:20 PM

RXtacy You mean deal's in 6 months?... 10-26-2015, 08:11 PM

TitaniumTT I'd hit it like the first of... 10-27-2015, 07:06 PM

RXtacy :naughty: Thanks homie. ... 10-27-2015, 09:30 PM

hades Why deep instead of a wider... 10-27-2015, 10:08 PM

TitaniumTT Reasons ;) Are you gonna... 10-27-2015, 11:45 PM

RXtacy Finished the cold side pipe.... 10-28-2015, 09:39 PM

RXtacy Finally got a clear day to... 11-11-2015, 06:20 PM

t_g_farrell Nice work and I'm a newb to... 11-12-2015, 10:14 AM

RXtacy The radiator and intercooler... 11-12-2015, 10:32 AM

TitaniumTT I still say ditch that shock... 11-12-2015, 10:53 PM

TitaniumTT And yes.... still looks good.... 11-12-2015, 10:53 PM

RXtacy Why, because of engine... 11-13-2015, 12:43 PM

TitaniumTT Yes, because of engine... 11-17-2015, 07:53 PM

speedjunkie Or just get an EFR since it... 11-17-2015, 09:55 PM

RXtacy You seem to be under the... 11-18-2015, 11:10 AM

speedjunkie I know! Totally worth it... 11-19-2015, 12:22 AM

TitaniumTT ^:smilielol5: Frankenstein... 11-18-2015, 01:51 PM

RXtacy Small update. Made a AST... 12-08-2015, 09:49 PM

TitaniumTT Nice. Did you cut the flange... 12-10-2015, 10:24 AM

RXtacy Cut it off the old thermostat... 12-10-2015, 11:43 AM

TitaniumTT Make me one tonight and... 12-10-2015, 08:56 PM

RXtacy I know you're joking, but I... 12-11-2015, 08:50 AM

TitaniumTT LOL, not going AN this time... 12-13-2015, 12:29 AM

RXtacy Haven't added a bung yet. You... 12-14-2015, 09:28 AM

TitaniumTT I'll tell you this weekend... 12-14-2015, 04:16 PM

RXtacy Got my coils in and finished... 12-15-2015, 11:03 PM

speedjunkie Nice bracket! I made one for... 12-16-2015, 02:41 AM

RXtacy Thanks, finally getting a... 12-16-2015, 09:41 AM

speedjunkie I didn't sand or coat mine or... 12-18-2015, 02:15 AM

RXtacy Looks good to me :icon_tup:... 12-18-2015, 10:32 AM

TitaniumTT Good lord man, didn't I cut... 12-16-2015, 01:23 PM

RXtacy Maybe... :suspect: I... 12-16-2015, 01:35 PM

TitaniumTT Yeah.... not high on the... 12-16-2015, 08:24 PM

TitaniumTT Eric, don't wrap them in... 12-18-2015, 02:13 PM

speedjunkie That was another concern I... 12-18-2015, 11:57 PM

RXtacy Fabbed up a 4" downpipe.... 12-28-2015, 09:49 PM

chibikougan High Precision Tato... 12-28-2015, 11:22 PM

RXtacy Indeed! 12-29-2015, 08:57 AM

TitaniumTT NIOCE! Pics installed! 12-29-2015, 10:09 AM

RXtacy Sure. ... 12-30-2015, 09:23 PM

TitaniumTT fawking tight. Nicely... 12-30-2015, 10:56 PM

RXtacy I orginally had a 3-4"... 12-30-2015, 11:48 PM

TitaniumTT Meh, it's not as bad add it... 12-31-2015, 12:26 AM

RXtacy No it's really not all that... 01-04-2016, 08:47 AM

RXtacy Small update. It's been cold... 02-10-2016, 10:24 AM

chibikougan Nice Bungholes! 02-10-2016, 02:37 PM

JL1RX7 Mike - Is that a roll of... 02-10-2016, 09:23 PM

RXtacy http://vignette4.wikia.nocooki... 02-11-2016, 09:04 AM

t_g_farrell Its the great Cornholio!... 02-11-2016, 10:40 AM

RXtacy I'll be doing a wire tuck and... 02-22-2016, 08:43 PM

GySgtFrank Such fun. :banghead: :lol: 02-22-2016, 10:51 PM

chibikougan An invisible FD!;) 02-22-2016, 10:57 PM

TitaniumTT Nah, it's clearly visible and... 02-23-2016, 09:11 AM

speedjunkie Exactly what I was thinking... 02-23-2016, 12:52 AM

RXtacy It's got the 007 package. ... 02-23-2016, 09:12 AM

TitaniumTT My feeling on body work ;) 02-23-2016, 10:28 AM

RXtacy I knew you were going to make... 02-23-2016, 11:25 AM

TitaniumTT Where's the hours of block... 02-23-2016, 04:05 PM

RXtacy You can remove all the seam... 02-23-2016, 04:20 PM

TitaniumTT Right after all the welding... 02-23-2016, 04:36 PM

RXtacy I meant in the entire bay,... 02-23-2016, 10:34 PM

RXtacy Got the harness wrap... 02-23-2016, 10:37 PM

speedjunkie For the first 8 years or so... 02-24-2016, 01:03 AM

TitaniumTT Total time about 2.5-3? 02-24-2016, 09:08 AM

RXtacy Yea I pulled it the first... 02-24-2016, 09:37 AM

TitaniumTT Must label. Saves looking... 02-24-2016, 10:09 AM

PaperClip

RXtacy Exaclty. Yes, fortunately... 02-24-2016, 11:04 AM

TitaniumTT Exactly You assume... 02-24-2016, 11:38 AM

RXtacy Figured. I'll trace... 02-24-2016, 11:56 AM

PaperClip

TitaniumTT Basically saying use the... 02-25-2016, 09:38 AM

PaperClip

RXtacy Not a lot to show, but have... 03-15-2016, 08:30 AM

RXtacy I have also begun fabricating... 03-15-2016, 08:34 AM

rotarynerdette Those welds have come a long... 03-16-2016, 12:30 PM

RXtacy You're telling me! Looking... 03-16-2016, 01:04 PM

chibikougan Well with the pro shops... 03-16-2016, 01:12 PM

rotarynerdette Did you see the new lastest... 03-17-2016, 02:57 PM

More replies below current depth...

rotarynerdette That is very true, I can't... 03-16-2016, 05:17 PM

RXtacy Other than the basic... 03-16-2016, 07:24 PM

More replies below current depth...

RXtacy Got a nice little care... 03-16-2016, 07:30 PM

chibikougan Oooh interesting... 03-16-2016, 07:37 PM

RXtacy Finished mocking up the... 03-17-2016, 09:11 PM

TitaniumTT Makes me consider dual 38's... 03-17-2016, 09:47 PM

chibikougan Nice... Does that machine... 03-17-2016, 10:05 PM

RXtacy Do it! Thanks. They're not... 03-18-2016, 08:30 AM

TitaniumTT 'Vert is going in soon ... 03-18-2016, 08:46 AM

More replies below current depth...

RXtacy It's been a while, but there... 05-23-2016, 08:59 AM

speedjunkie Nice! Get er dun! 05-27-2016, 01:08 AM

TitaniumTT How has no one comments on... 05-27-2016, 07:58 AM

RXtacy Thanks, we're making... 05-27-2016, 08:13 AM

TitaniumTT Needs moar pictars 05-27-2016, 08:42 AM

RXtacy That's all I got :dunno: 05-27-2016, 10:35 AM

TitaniumTT You're car is actually going... 05-27-2016, 10:40 AM

RXtacy :squint: 05-27-2016, 10:43 AM

RXtacy Got the harness wrapped up... 06-03-2016, 11:16 AM

TitaniumTT Makes my penis cry blood 06-03-2016, 11:59 AM

RXtacy You might wanna get that... 06-03-2016, 12:05 PM

RXtacy Finally got back into fab... 06-06-2016, 08:50 AM

hades Nice man 06-06-2016, 08:55 AM

TitaniumTT Will also get trailer... 06-06-2016, 09:15 AM

RXtacy Thanks homie. Word. 06-06-2016, 09:25 AM

speedjunkie I never understood why they... 06-07-2016, 02:19 AM

RXtacy Weight reduction brah! :lol:... 06-07-2016, 09:30 AM

speedjunkie Well, considering other areas... 06-08-2016, 01:07 AM

TitaniumTT Cost ;) 06-08-2016, 08:13 AM

speedjunkie Well, obviously, but Mazda... 06-10-2016, 01:52 AM

TitaniumTT Nah, the plastic is for cost,... 06-10-2016, 08:28 AM

speedjunkie Yeah, but most OEM don't have... 06-10-2016, 11:45 AM

RXtacy A little something for TIG'd... 06-14-2016, 10:31 AM

RXtacy It was a helacious weekend,... 07-11-2016, 08:29 AM

Fendamonky Bad. ASS!!! Looking great... 07-11-2016, 08:33 AM

RXtacy Thanks bud! Pretty much... 07-11-2016, 08:36 AM

Fendamonky Yeah, I can imagine that... 07-11-2016, 08:56 AM

RXtacy Na, I'm usually shuffling... 07-11-2016, 09:20 AM

TitaniumTT :awesome: Cheers Need... 07-11-2016, 09:37 AM

Fendamonky Ah, I didn't realize you were... 07-11-2016, 09:47 AM

TitaniumTT Werd, It's why everyone needs... 07-11-2016, 09:56 AM

RXtacy That. Would have been... 07-11-2016, 10:10 AM

RXtacy While the sub frame is out... 07-21-2016, 08:58 PM

hades Well that made me wet 07-21-2016, 09:27 PM

Fendamonky Sexy!!! I've always wanted to... 07-22-2016, 06:05 AM

TitaniumTT :awesome: Your arbor press... 07-22-2016, 08:07 AM

Fendamonky Well, I'd like to be able to... 07-22-2016, 08:11 AM

More replies below current depth...

TitaniumTT Moar parts going backwards... 07-22-2016, 10:00 AM

RXtacy Ah true, but should be... 07-22-2016, 10:25 AM

TitaniumTT Ah, kewl.... was unsure how... 07-22-2016, 10:46 AM

RXtacy Yea I like the idea of... 07-22-2016, 10:50 AM

TitaniumTT :rofl: Like I'm going to... 07-22-2016, 10:57 AM

RXtacy :squint: If I even see you... 07-22-2016, 11:13 AM

TitaniumTT Now we are getting kinky... 07-22-2016, 11:35 AM

chibikougan Just buy a smaller socket... 07-22-2016, 03:11 PM

chibikougan Or just weld a damn Nut on... 07-22-2016, 03:12 PM

RXtacy That's all fine and good if... 07-22-2016, 03:19 PM

TitaniumTT Done both, both have... 07-22-2016, 03:33 PM

chibikougan Haha likely look a lot like... 07-22-2016, 03:46 PM

RXtacy Never said it was lost. I... 07-22-2016, 06:29 PM

TitaniumTT Fuckin Auggie..... 07-22-2016, 04:33 PM

RXtacy Well it was another weekend... 08-01-2016, 08:53 AM

Pete_89T2 Damn, for the wrong color... 08-01-2016, 01:52 PM

TitaniumTT :awesome: Yeah.... I'm... 08-01-2016, 04:37 PM

FC Zach Yeah, looks good! 08-01-2016, 10:40 PM

speedjunkie Ah yes, I've been through... 08-02-2016, 02:28 AM

RXtacy :lol: No thanks. ... 08-02-2016, 08:15 AM

speedjunkie Yeah it's a good color, but I... 08-03-2016, 02:41 AM

RXtacy Thanks Levi. It could... 08-03-2016, 07:59 AM

GySgtFrank Maybe get shiney paint this... 08-10-2016, 09:05 AM

RXtacy You get the fuck out of here... 08-22-2016, 09:17 AM

speedjunkie Double post. POS computer. 08-02-2016, 02:51 AM

Fendamonky That's looking damn good... 08-02-2016, 09:55 AM

PaperClip

RXtacy Update: paint round 2! ... 08-22-2016, 09:27 AM

RXtacy Really happy with how the... 08-22-2016, 09:30 AM

chibikougan You forgot to leave the holes... 08-22-2016, 11:46 AM

Fendamonky Looks great Mike!!! So... you... 08-22-2016, 12:10 PM

RXtacy I have no interest in doing... 01-17-2017, 11:01 AM

PaperClip

RXtacy It's been a while, but we put... 01-17-2017, 11:10 AM

PaperClip

RXtacy Got the radiator and oil... 01-17-2017, 11:20 AM

knonfs Looking GOOD!!!! 01-17-2017, 11:39 AM

Nutsid I have to say that, again, I... 01-17-2017, 12:23 PM

RXtacy Thanks man :biggthumpup: ... 01-17-2017, 01:04 PM

chibikougan Whooooo! 01-17-2017, 01:49 PM

speedjunkie Damn, putting in WORK! Looks... 01-19-2017, 03:45 AM

hades Looks like it needs some 3D... 01-19-2017, 08:52 AM

RXtacy :awesome: It's about... 01-19-2017, 10:23 AM

hades Yes yes yes 01-19-2017, 04:17 PM

speedjunkie Well I wasn't gonna say... 01-19-2017, 09:51 PM

PaperClip

RXtacy New update. Been very busy... 03-13-2017, 01:24 PM

chibikougan GLORY HOLE!:rofl: 03-13-2017, 01:41 PM

speedjunkie Looks awesome! 03-14-2017, 12:05 AM

knonfs LOVE the updates! 03-14-2017, 07:46 AM

PaperClip

RXtacy Thanks guys. Finished... 03-14-2017, 09:22 AM

GySgtFrank oooh! shiney! wait ...... 03-14-2017, 06:01 PM

RXtacy Thanks man :cheers2: ... 03-14-2017, 07:48 PM

hades Looks good. Expecting... 03-14-2017, 07:50 PM

More replies below current depth...

Johnny_K very nice. 03-14-2017, 11:08 AM

chibikougan That should fit my Curvature... 03-14-2017, 01:34 PM

PaperClip

RXtacy A lot of work happened this... 03-27-2017, 09:15 AM

speedjunkie Looks awesome! Nice work! 03-29-2017, 04:22 PM

RXtacy Thanks! :cheers2: 03-30-2017, 10:32 AM

knonfs AGREE! It might not be... 03-31-2017, 09:52 AM

PaperClip

RXtacy Got some small items finished... 04-03-2017, 09:04 PM

RXtacy It's been a long time since... 07-10-2017, 09:18 AM

Fendamonky Sexy. I love how it's looking... 07-10-2017, 09:44 AM

RXtacy Thanks Kevin. Routing looks... 07-10-2017, 10:02 AM

GySgtFrank You weren't stupid enough to... 07-10-2017, 10:40 AM

Pete_89T2 Looking good there Mike! Now... 07-10-2017, 11:25 AM

GySgtFrank Very nice. Much prettier than... 07-10-2017, 09:23 AM

RXtacy Well it's been quite a while... 12-18-2017, 08:29 PM

GySgtFrank Coming along nicely. I would... 12-18-2017, 08:37 PM

RXtacy Said comment would be well... 12-18-2017, 08:58 PM

Prev

Previous Post

Next Post

Next

10-29-2013, 06:35 PM	#11
RENESISFD Rotary Fan in Training Join Date: Jul 2011 Posts: 50 Rep Power: 14	^, yes, I use stainless hardline on the wastegates vacuum lines. I just do not have them pictured. This pic was taken after I blew my motor this year. I had 5k miles on the turbo setup and lines at the time. 70k mi on the stock motor.

Bookmarks

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -5. The time now is 12:26 PM.