RXtacy's slooow build up - Rotary Car Club

RXtacy RXtacy's slooow build up 03-16-2013, 03:38 PM

RXtacy Dash pulled and ready to... 03-16-2013, 03:44 PM

RXtacy Once the interior was up to... 03-16-2013, 03:53 PM

RXtacy All sanded and primed. Also... 03-16-2013, 03:56 PM

RXtacy The results! How she looked... 03-16-2013, 04:05 PM

chibikougan Nice whats so slow about this... 03-16-2013, 04:14 PM

RXtacy That's all historic stuff... 03-16-2013, 04:34 PM

RXtacy Once I got her back home I... 03-16-2013, 04:13 PM

RXtacy Not much changed between 2011... 03-16-2013, 04:33 PM

RXtacy Up until this point... 03-16-2013, 05:51 PM

Fendamonky You know I had COMPLETELY... 03-20-2013, 12:37 PM

RXtacy I need to do a LOT of things... 03-20-2013, 01:54 PM

JL1RX7 Let me know if you need a... 03-20-2013, 02:35 PM

RXtacy UPDATE! :lol: After tear... 10-10-2013, 01:48 PM

RXtacy How do I plan to get more air... 10-10-2013, 02:06 PM

RXtacy Got my turbo from Turblown.... 10-10-2013, 02:23 PM

RXtacy Next it was on to the fuel... 10-10-2013, 02:34 PM

RXtacy Once the fuel system was... 10-10-2013, 02:47 PM

RXtacy That's pretty much up to date... 10-10-2013, 02:53 PM

RedR1 that's looking quite baller,... 10-10-2013, 03:06 PM

RXtacy Thanks buddy! I haven't made... 10-10-2013, 03:12 PM

RedR1 do you think chassis flex... 10-10-2013, 03:23 PM

RXtacy Would what rub? If you're... 10-10-2013, 03:52 PM

More replies below current depth...

speedjunkie I'm diggin how short those... 10-11-2013, 09:04 PM

RXtacy Yea I put an empty keg in my... 10-11-2013, 09:26 PM

speedjunkie Sweet! Yeah I remember... 10-12-2013, 07:11 PM

RXtacy Small update. Did some more... 10-11-2013, 09:32 PM

chibikougan Oooooh! 10-11-2013, 11:03 PM

RXtacy Thank you sir for the tips!... 10-12-2013, 02:52 AM

Fendamonky Looking badass Mike!! I can´t... 10-14-2013, 09:08 AM

RXtacy Haha no worries. Is it Eric?... 10-14-2013, 07:07 PM

RXtacy Small update: Made the cut... 10-14-2013, 08:38 PM

chibikougan Teee Heee! That setup seems... 10-14-2013, 10:23 PM

JhnRX7 Awesome project! Looking... 10-21-2013, 01:24 PM

RXtacy Thanks John :icon_tup: ... 10-21-2013, 02:49 PM

Turblown Interesting! Looking forward... 10-21-2013, 06:33 PM

RXtacy Thanks! Me too :sifone: ... 10-21-2013, 07:19 PM

More replies below current depth...

speedjunkie I'm planning on plumbing mine... 10-22-2013, 12:48 PM

TitaniumTT Looks good Mike! I <3 Pics ... 10-23-2013, 05:31 PM

JhnRX7 :smilielol5: Yeahhhhh this... 10-23-2013, 06:04 PM

RXtacy Thanks buddy. I left out what... 10-24-2013, 08:03 AM

TitaniumTT DO IT! I need a trailer in a... 10-23-2013, 06:49 PM

RXtacy Few pics of the finished... 10-24-2013, 05:27 PM

Fendamonky That looks pretty damn good... 10-25-2013, 10:59 AM

RXtacy Gotcha, yea my plan is to do... 10-25-2013, 11:38 AM

speedjunkie Yeah I always wondered too... 10-25-2013, 06:51 PM

More replies below current depth...

JhnRX7 :o16: Sexy! 10-25-2013, 05:43 AM

RENESISFD Nice work on the short runner... 10-25-2013, 10:24 AM

RXtacy Has anyone else encountered... 10-26-2013, 02:57 PM

RXtacy Small update. Got started... 10-26-2013, 03:04 PM

speedjunkie Yeah I didn't think it was... 10-27-2013, 10:43 PM

Fendamonky Your setup keeps getting... 10-26-2013, 05:29 PM

RENESISFD It looks like you are... 10-28-2013, 08:21 AM

RXtacy Has the wait time on the EFR... 10-28-2013, 09:31 AM

speedjunkie Yeah I've heard it's gotten... 10-28-2013, 05:47 PM

Pete_89T2 That hardline setup is sweet,... 10-28-2013, 06:51 PM

RXtacy Maybe the price increase has... 10-28-2013, 07:37 PM

RENESISFD That seems like the only one... 10-28-2013, 09:55 AM

RXtacy That's not a bad idea. I have... 10-28-2013, 10:06 AM

RENESISFD I have aluminum banjo... 10-29-2013, 02:25 PM

speedjunkie Maybe lol, I have no idea. ... 10-29-2013, 05:22 PM

RENESISFD ^, yes, I use stainless... 10-29-2013, 06:35 PM

RXtacy The proper set up for thermal... 10-29-2013, 08:51 PM

speedjunkie Hmmmm, that does sound like a... 10-31-2013, 10:38 PM

RENESISFD ^ This is the best I could... 10-30-2013, 08:02 AM

RXtacy Hopefully... :rofl: ... 10-31-2013, 07:31 AM

RXtacy Where did you find the... 11-01-2013, 09:38 PM

RENESISFD T-fittings from... 11-02-2013, 06:23 AM

kraftjason413 If I may step back a bit,... 11-26-2013, 11:45 AM

Fendamonky The reason(s) people tend to... 11-26-2013, 05:08 PM

Turblown Any updates ? 12-10-2013, 04:30 PM

RXtacy Just got back from ~month in... 12-10-2013, 05:25 PM

RXtacy Not much of an update, but I... 08-06-2015, 08:33 AM

silverfdturbo6port Nice build and nice welds. ... 08-06-2015, 12:11 PM

RXtacy Thanks :icon_tup: You... 08-06-2015, 02:33 PM

RXtacy Here is how the engine sits... 08-06-2015, 09:28 PM

RXtacy Also dual passed my radiator.... 08-06-2015, 09:37 PM

GySgtFrank You actually have been... 08-06-2015, 09:39 PM

RXtacy Never claimed I was gonna... 08-06-2015, 09:44 PM

speedjunkie You may want to add a few... 08-08-2015, 02:47 AM

RXtacy I want to have a clever come... 08-09-2015, 06:46 PM

RXtacy Made some really good... 08-09-2015, 07:30 PM

GySgtFrank You know where you can stick... 08-09-2015, 08:50 PM

RXtacy Thought you might like that,... 08-09-2015, 09:31 PM

GySgtFrank I figured that's who the... 08-09-2015, 09:36 PM

RXtacy Made some more progress. Got... 08-15-2015, 07:34 PM

GySgtFrank Woohoo! progress. I've been... 08-15-2015, 09:00 PM

RXtacy In a standard vertical... 08-15-2015, 09:23 PM

GySgtFrank That's why they're called... 08-15-2015, 09:29 PM

RXtacy You know KS was a Union state... 08-15-2015, 09:33 PM

TitaniumTT :fawk: There was a list,... 08-17-2015, 09:49 PM

More replies below current depth...

speedjunkie I'm reinstalling AC too after... 08-16-2015, 03:04 AM

RXtacy Yea I hear ya. Getting swamp... 08-17-2015, 09:52 AM

More replies below current depth...

Fendamonky That looks fucking GREAT... 08-19-2015, 11:59 AM

RXtacy Thanks buddy! The bay... 08-20-2015, 12:21 AM

speedjunkie No shit? I'll have to try... 08-20-2015, 01:27 AM

TitaniumTT There are two things certain... 08-30-2015, 12:32 PM

RXtacy Should we do the percentage... 08-30-2015, 05:48 PM

JL1RX7 Shit just got real! That... 08-30-2015, 05:58 PM

RXtacy Been out of town for work and... 08-29-2015, 02:38 PM

GySgtFrank oooh! shiny bits. :) 08-29-2015, 03:04 PM

speedjunkie Oh my. I've thought about... 08-29-2015, 11:32 PM

RXtacy Shiny for now ;) I... 08-29-2015, 11:56 PM

chibikougan Woohooo! 08-30-2015, 12:45 AM

TitaniumTT Right before we ANALyze the... 08-30-2015, 08:42 PM

Nutsid I'm digging how the car is... 09-03-2015, 05:08 AM

RXtacy Touché :lol: Thanks... 09-08-2015, 11:25 AM

xcon Nice work and looking good :) 10-20-2015, 04:24 PM

RXtacy Good to see a new face :) ... 10-21-2015, 09:14 AM

speedjunkie I like those end tanks so... 10-22-2015, 01:02 AM

RXtacy Cut a large pipe in half.... 10-22-2015, 08:08 AM

speedjunkie Shit, whatever man, that... 10-24-2015, 12:43 AM

RXtacy Got the intercooler mostly... 10-23-2015, 08:15 AM

GySgtFrank That is quite pretty. Appears... 10-23-2015, 08:37 AM

RXtacy Thanks Kevin. I spent a lot... 10-23-2015, 08:45 AM

TitaniumTT I'll post pics of the VMIC I... 10-24-2015, 12:54 PM

speedjunkie Rotary fever? 10-25-2015, 02:11 AM

TitaniumTT lol... the 102* I spiked... 10-25-2015, 10:26 AM

RXtacy Thanks buddy! :lol: I... 10-26-2015, 08:38 AM

speedjunkie Well I think it still turned... 10-27-2015, 12:58 AM

RXtacy Don't get me wrong I'm happy... 10-27-2015, 09:33 AM

More replies below current depth...

RXtacy Here is the hot side pipe... 10-26-2015, 06:36 PM

JL1RX7 Might this make an appearance... 10-26-2015, 07:20 PM

RXtacy You mean deal's in 6 months?... 10-26-2015, 08:11 PM

TitaniumTT I'd hit it like the first of... 10-27-2015, 07:06 PM

RXtacy :naughty: Thanks homie. ... 10-27-2015, 09:30 PM

hades Why deep instead of a wider... 10-27-2015, 10:08 PM

TitaniumTT Reasons ;) Are you gonna... 10-27-2015, 11:45 PM

RXtacy Finished the cold side pipe.... 10-28-2015, 09:39 PM

RXtacy Finally got a clear day to... 11-11-2015, 06:20 PM

t_g_farrell Nice work and I'm a newb to... 11-12-2015, 10:14 AM

RXtacy The radiator and intercooler... 11-12-2015, 10:32 AM

TitaniumTT I still say ditch that shock... 11-12-2015, 10:53 PM

TitaniumTT And yes.... still looks good.... 11-12-2015, 10:53 PM

RXtacy Why, because of engine... 11-13-2015, 12:43 PM

TitaniumTT Yes, because of engine... 11-17-2015, 07:53 PM

speedjunkie Or just get an EFR since it... 11-17-2015, 09:55 PM

RXtacy You seem to be under the... 11-18-2015, 11:10 AM

speedjunkie I know! Totally worth it... 11-19-2015, 12:22 AM

TitaniumTT ^:smilielol5: Frankenstein... 11-18-2015, 01:51 PM

RXtacy Small update. Made a AST... 12-08-2015, 09:49 PM

TitaniumTT Nice. Did you cut the flange... 12-10-2015, 10:24 AM

RXtacy Cut it off the old thermostat... 12-10-2015, 11:43 AM

TitaniumTT Make me one tonight and... 12-10-2015, 08:56 PM

RXtacy I know you're joking, but I... 12-11-2015, 08:50 AM

TitaniumTT LOL, not going AN this time... 12-13-2015, 12:29 AM

RXtacy Haven't added a bung yet. You... 12-14-2015, 09:28 AM

TitaniumTT I'll tell you this weekend... 12-14-2015, 04:16 PM

RXtacy Got my coils in and finished... 12-15-2015, 11:03 PM

speedjunkie Nice bracket! I made one for... 12-16-2015, 02:41 AM

RXtacy Thanks, finally getting a... 12-16-2015, 09:41 AM

speedjunkie I didn't sand or coat mine or... 12-18-2015, 02:15 AM

RXtacy Looks good to me :icon_tup:... 12-18-2015, 10:32 AM

TitaniumTT Good lord man, didn't I cut... 12-16-2015, 01:23 PM

RXtacy Maybe... :suspect: I... 12-16-2015, 01:35 PM

TitaniumTT Yeah.... not high on the... 12-16-2015, 08:24 PM

TitaniumTT Eric, don't wrap them in... 12-18-2015, 02:13 PM

speedjunkie That was another concern I... 12-18-2015, 11:57 PM

RXtacy Fabbed up a 4" downpipe.... 12-28-2015, 09:49 PM

chibikougan High Precision Tato... 12-28-2015, 11:22 PM

RXtacy Indeed! 12-29-2015, 08:57 AM

TitaniumTT NIOCE! Pics installed! 12-29-2015, 10:09 AM

RXtacy Sure. ... 12-30-2015, 09:23 PM

TitaniumTT fawking tight. Nicely... 12-30-2015, 10:56 PM

RXtacy I orginally had a 3-4"... 12-30-2015, 11:48 PM

TitaniumTT Meh, it's not as bad add it... 12-31-2015, 12:26 AM

RXtacy No it's really not all that... 01-04-2016, 08:47 AM

RXtacy Small update. It's been cold... 02-10-2016, 10:24 AM

chibikougan Nice Bungholes! 02-10-2016, 02:37 PM

JL1RX7 Mike - Is that a roll of... 02-10-2016, 09:23 PM

RXtacy http://vignette4.wikia.nocooki... 02-11-2016, 09:04 AM

t_g_farrell Its the great Cornholio!... 02-11-2016, 10:40 AM

RXtacy I'll be doing a wire tuck and... 02-22-2016, 08:43 PM

GySgtFrank Such fun. :banghead: :lol: 02-22-2016, 10:51 PM

chibikougan An invisible FD!;) 02-22-2016, 10:57 PM

TitaniumTT Nah, it's clearly visible and... 02-23-2016, 09:11 AM

speedjunkie Exactly what I was thinking... 02-23-2016, 12:52 AM

RXtacy It's got the 007 package. ... 02-23-2016, 09:12 AM

TitaniumTT My feeling on body work ;) 02-23-2016, 10:28 AM

RXtacy I knew you were going to make... 02-23-2016, 11:25 AM

TitaniumTT Where's the hours of block... 02-23-2016, 04:05 PM

RXtacy You can remove all the seam... 02-23-2016, 04:20 PM

TitaniumTT Right after all the welding... 02-23-2016, 04:36 PM

RXtacy I meant in the entire bay,... 02-23-2016, 10:34 PM

RXtacy Got the harness wrap... 02-23-2016, 10:37 PM

speedjunkie For the first 8 years or so... 02-24-2016, 01:03 AM

TitaniumTT Total time about 2.5-3? 02-24-2016, 09:08 AM

RXtacy Yea I pulled it the first... 02-24-2016, 09:37 AM

TitaniumTT Must label. Saves looking... 02-24-2016, 10:09 AM

RXtacy Exaclty. Yes, fortunately... 02-24-2016, 11:04 AM

TitaniumTT Exactly You assume... 02-24-2016, 11:38 AM

RXtacy Figured. I'll trace... 02-24-2016, 11:56 AM

TitaniumTT Basically saying use the... 02-25-2016, 09:38 AM

RXtacy Not a lot to show, but have... 03-15-2016, 08:30 AM

RXtacy I have also begun fabricating... 03-15-2016, 08:34 AM

rotarynerdette Those welds have come a long... 03-16-2016, 12:30 PM

RXtacy You're telling me! Looking... 03-16-2016, 01:04 PM

chibikougan Well with the pro shops... 03-16-2016, 01:12 PM

rotarynerdette Did you see the new lastest... 03-17-2016, 02:57 PM

More replies below current depth...

rotarynerdette That is very true, I can't... 03-16-2016, 05:17 PM

RXtacy Other than the basic... 03-16-2016, 07:24 PM

More replies below current depth...

RXtacy Got a nice little care... 03-16-2016, 07:30 PM

chibikougan Oooh interesting... 03-16-2016, 07:37 PM

RXtacy Finished mocking up the... 03-17-2016, 09:11 PM

TitaniumTT Makes me consider dual 38's... 03-17-2016, 09:47 PM

chibikougan Nice... Does that machine... 03-17-2016, 10:05 PM

RXtacy Do it! Thanks. They're not... 03-18-2016, 08:30 AM

TitaniumTT 'Vert is going in soon ... 03-18-2016, 08:46 AM

More replies below current depth...

RXtacy It's been a while, but there... 05-23-2016, 08:59 AM

speedjunkie Nice! Get er dun! 05-27-2016, 01:08 AM

TitaniumTT How has no one comments on... 05-27-2016, 07:58 AM

RXtacy Thanks, we're making... 05-27-2016, 08:13 AM

TitaniumTT Needs moar pictars 05-27-2016, 08:42 AM

RXtacy That's all I got :dunno: 05-27-2016, 10:35 AM

TitaniumTT You're car is actually going... 05-27-2016, 10:40 AM

RXtacy :squint: 05-27-2016, 10:43 AM

RXtacy Got the harness wrapped up... 06-03-2016, 11:16 AM

TitaniumTT Makes my penis cry blood 06-03-2016, 11:59 AM

RXtacy You might wanna get that... 06-03-2016, 12:05 PM

RXtacy Finally got back into fab... 06-06-2016, 08:50 AM

hades Nice man 06-06-2016, 08:55 AM

TitaniumTT Will also get trailer... 06-06-2016, 09:15 AM

RXtacy Thanks homie. Word. 06-06-2016, 09:25 AM

speedjunkie I never understood why they... 06-07-2016, 02:19 AM

RXtacy Weight reduction brah! :lol:... 06-07-2016, 09:30 AM

speedjunkie Well, considering other areas... 06-08-2016, 01:07 AM

TitaniumTT Cost ;) 06-08-2016, 08:13 AM

speedjunkie Well, obviously, but Mazda... 06-10-2016, 01:52 AM

TitaniumTT Nah, the plastic is for cost,... 06-10-2016, 08:28 AM

speedjunkie Yeah, but most OEM don't have... 06-10-2016, 11:45 AM

RXtacy A little something for TIG'd... 06-14-2016, 10:31 AM

RXtacy It was a helacious weekend,... 07-11-2016, 08:29 AM

Fendamonky Bad. ASS!!! Looking great... 07-11-2016, 08:33 AM

RXtacy Thanks bud! Pretty much... 07-11-2016, 08:36 AM

Fendamonky Yeah, I can imagine that... 07-11-2016, 08:56 AM

RXtacy Na, I'm usually shuffling... 07-11-2016, 09:20 AM

TitaniumTT :awesome: Cheers Need... 07-11-2016, 09:37 AM

Fendamonky Ah, I didn't realize you were... 07-11-2016, 09:47 AM

TitaniumTT Werd, It's why everyone needs... 07-11-2016, 09:56 AM

RXtacy That. Would have been... 07-11-2016, 10:10 AM

RXtacy While the sub frame is out... 07-21-2016, 08:58 PM

hades Well that made me wet 07-21-2016, 09:27 PM

Fendamonky Sexy!!! I've always wanted to... 07-22-2016, 06:05 AM

TitaniumTT :awesome: Your arbor press... 07-22-2016, 08:07 AM

Fendamonky Well, I'd like to be able to... 07-22-2016, 08:11 AM

More replies below current depth...

TitaniumTT Moar parts going backwards... 07-22-2016, 10:00 AM

RXtacy Ah true, but should be... 07-22-2016, 10:25 AM

TitaniumTT Ah, kewl.... was unsure how... 07-22-2016, 10:46 AM

RXtacy Yea I like the idea of... 07-22-2016, 10:50 AM

TitaniumTT :rofl: Like I'm going to... 07-22-2016, 10:57 AM

RXtacy :squint: If I even see you... 07-22-2016, 11:13 AM

TitaniumTT Now we are getting kinky... 07-22-2016, 11:35 AM

chibikougan Just buy a smaller socket... 07-22-2016, 03:11 PM

chibikougan Or just weld a damn Nut on... 07-22-2016, 03:12 PM

RXtacy That's all fine and good if... 07-22-2016, 03:19 PM

TitaniumTT Done both, both have... 07-22-2016, 03:33 PM

chibikougan Haha likely look a lot like... 07-22-2016, 03:46 PM

RXtacy Never said it was lost. I... 07-22-2016, 06:29 PM

TitaniumTT Fuckin Auggie..... 07-22-2016, 04:33 PM

RXtacy Well it was another weekend... 08-01-2016, 08:53 AM

Pete_89T2 Damn, for the wrong color... 08-01-2016, 01:52 PM

TitaniumTT :awesome: Yeah.... I'm... 08-01-2016, 04:37 PM

FC Zach Yeah, looks good! 08-01-2016, 10:40 PM

speedjunkie Ah yes, I've been through... 08-02-2016, 02:28 AM

RXtacy :lol: No thanks. ... 08-02-2016, 08:15 AM

speedjunkie Yeah it's a good color, but I... 08-03-2016, 02:41 AM

RXtacy Thanks Levi. It could... 08-03-2016, 07:59 AM

GySgtFrank Maybe get shiney paint this... 08-10-2016, 09:05 AM

RXtacy You get the fuck out of here... 08-22-2016, 09:17 AM

speedjunkie Double post. POS computer. 08-02-2016, 02:51 AM

Fendamonky That's looking damn good... 08-02-2016, 09:55 AM

RXtacy Update: paint round 2! ... 08-22-2016, 09:27 AM

RXtacy Really happy with how the... 08-22-2016, 09:30 AM

chibikougan You forgot to leave the holes... 08-22-2016, 11:46 AM

Fendamonky Looks great Mike!!! So... you... 08-22-2016, 12:10 PM

RXtacy I have no interest in doing... 01-17-2017, 11:01 AM

RXtacy It's been a while, but we put... 01-17-2017, 11:10 AM

RXtacy Got the radiator and oil... 01-17-2017, 11:20 AM

knonfs Looking GOOD!!!! 01-17-2017, 11:39 AM

Nutsid I have to say that, again, I... 01-17-2017, 12:23 PM

RXtacy Thanks man :biggthumpup: ... 01-17-2017, 01:04 PM

chibikougan Whooooo! 01-17-2017, 01:49 PM

speedjunkie Damn, putting in WORK! Looks... 01-19-2017, 03:45 AM

hades Looks like it needs some 3D... 01-19-2017, 08:52 AM

RXtacy :awesome: It's about... 01-19-2017, 10:23 AM

hades Yes yes yes 01-19-2017, 04:17 PM

speedjunkie Well I wasn't gonna say... 01-19-2017, 09:51 PM

RXtacy New update. Been very busy... 03-13-2017, 01:24 PM

chibikougan GLORY HOLE!:rofl: 03-13-2017, 01:41 PM

speedjunkie Looks awesome! 03-14-2017, 12:05 AM

knonfs LOVE the updates! 03-14-2017, 07:46 AM

RXtacy Thanks guys. Finished... 03-14-2017, 09:22 AM

GySgtFrank oooh! shiney! wait ...... 03-14-2017, 06:01 PM

RXtacy Thanks man :cheers2: ... 03-14-2017, 07:48 PM

hades Looks good. Expecting... 03-14-2017, 07:50 PM

More replies below current depth...

Johnny_K very nice. 03-14-2017, 11:08 AM

chibikougan That should fit my Curvature... 03-14-2017, 01:34 PM

RXtacy A lot of work happened this... 03-27-2017, 09:15 AM

speedjunkie Looks awesome! Nice work! 03-29-2017, 04:22 PM

RXtacy Thanks! :cheers2: 03-30-2017, 10:32 AM

knonfs AGREE! It might not be... 03-31-2017, 09:52 AM

RXtacy Got some small items finished... 04-03-2017, 09:04 PM

RXtacy It's been a long time since... 07-10-2017, 09:18 AM

Fendamonky Sexy. I love how it's looking... 07-10-2017, 09:44 AM

RXtacy Thanks Kevin. Routing looks... 07-10-2017, 10:02 AM

GySgtFrank You weren't stupid enough to... 07-10-2017, 10:40 AM

Pete_89T2 Looking good there Mike! Now... 07-10-2017, 11:25 AM

GySgtFrank Very nice. Much prettier than... 07-10-2017, 09:23 AM

RXtacy Well it's been quite a while... 12-18-2017, 08:29 PM

GySgtFrank Coming along nicely. I would... 12-18-2017, 08:37 PM

RXtacy Said comment would be well... 12-18-2017, 08:58 PM